Need help with a 1988 610

Vintage, Modern, V & C Series, Signature & Special Editions

Moderators: rickenbrother, ajish4

Post Reply
adam_swapp
Member
Posts: 389
Joined: Sun Feb 15, 2004 7:49 pm
Contact:

Need help with a 1988 610

Post by adam_swapp »

I just picked up a 1988 610 as a restoration project. It's finished in Primerglo and missing some hardware, so I need a little help on this one:

- What colors were available in 1988?
- Trapeze or R tailpiece?
- Hi-gain pickups?
- Nameplate: raised or printed?
- How rare/common are 1988 610's?
- Value of a complete, original model in good shape?

Thanks.
You want to put that where?
BobKat
Advanced Member
Posts: 1712
Joined: Fri Feb 13, 2004 9:18 am

Post by BobKat »

Fireglo, Jetglo, Mapleglo, Midnight Blue, White, Red, and I have seen a 1988 610 in Burgundy.

R
High-Gains
Raised
Pretty common. Not as common as a 330. But not "rare" (the most overused word in guitardon).
Complete, original model, excellent shape, all stock: $650-$700.

I have some parts.
adam_swapp
Member
Posts: 389
Joined: Sun Feb 15, 2004 7:49 pm
Contact:

Post by adam_swapp »

Thanks for the info. Glad to hear it's not rare; I'll have no qualms about having my way with it. Image

I can't figure out if it was originally red or Jetglo. It's got traces of both colors of paint in the usual cavities and the grain, but I'm leaning towards red. It's also got graffiti on the bare wood that was added after a previous finish was stripped. Of course, the case did have NoFX and Dwarves stickers on it. Image

BTW, was there a BT option in 1988?
You want to put that where?
User avatar
jwilli
RRF Consultant
Posts: 4327
Joined: Sun Aug 06, 2000 8:45 pm

Post by jwilli »

"BTW, was there a BT option in 1988?"

Yes.
I believe that you could also get Silver finish back then.
adam_swapp
Member
Posts: 389
Joined: Sun Feb 15, 2004 7:49 pm
Contact:

Post by adam_swapp »

Not that anyone cares, but I found this interesting: the graffiti to which I referred actually said "Bad Top!". There was a divot between the pickups that was marked with something that looked like "NY". I don't know if that's from the factory or not.

Image

There's another weird thing about the body: the hole for the ground wire from the bridge plate to the control cavity is blocked by a piece of metal. A second hole was drilled from under the bridge plate to the bridge pickup cavity. I'm guessing the ground wire was routed through there.

The original finish was Jetglo. The traces of red (and green, and yellow, and blue, and orange) paint are apparently the remnants of an abortive attempt to duplicate the finish on Clapton's SG. The things people do. Image
You want to put that where?
Post Reply

Return to “Rickenbacker Guitars: by John Simmons”