Kenny Howes rejoins the 4001 club

[iiipopes]

I already did some fixing...all of the pickguard screws were replaced with these big ugly hardware store things, and the neck was a little bowed. One trip to the parts box, and some shots of Deoxit, and the MojoGlo is screamin'.

The wiring wasn't monkeyed with at all, down to the .0047 cap. Jury is still out on removing it - normally I would, but I want to mess with some ROS bimaping stuff first.

Push-Pull?

[jps]

I already did some fixing...all of the pickguard screws were replaced with these big ugly hardware store things, and the neck was a little bowed. One trip to the parts box, and some shots of Deoxit, and the MojoGlo is screamin'.

The wiring wasn't monkeyed with at all, down to the .0047 cap. Jury is still out on removing it - normally I would, but I want to mess with some ROS bimaping stuff first.

Push-Pull?

Push-pull bimaping? Hmm, interesting idea.

[jps]

And THAT, my friends, is how you revive a dead thread on a specialty music forum.

Well, why have an archive if you aren't allowed to exhume a thread once in a while?

[kennyhowes]

Kenny, is your exchange there the same Kevin from the Vox page, of the Vintage Amps Forum ?

Yep!

[rickenbrother]

And the 4001 BG? I realized the fingerboard had previously separated from the neck, and someone unsuccessfully tried to glue it back, but the separation opened back up, and then the glue re-dried, so in a nutshell there's no way I could have made it work without removing and reattaching the whole fingerboard.

So I returned it within 30 days to the Brea GC.

It remained there for a VERRRRY long time after you brought it back.

[kennyhowes]

And THAT, my friends, is how you revive a dead thread on a specialty music forum.

Well, why have an archive if you aren't allowed to exhume a thread once in a while?

And there you have it.