4004 delivery today!

[superheavydeathmetal]

Man, I would really like to try one of these. But, lefty specimens don't come around very often.

[cassius987]

Welcome to the Club For Those With The Chutzpah To Think Modern When It Comes To Rick Basses! CFTWTCTTMWICRB Try and pronounce that!

Sorry Jeff, I'm not fluent in Welsh!

I'll post some photos at the weekend.

Ash

It took a used, modified 4004 with some special circumstances to bring me into the fold but I must say it is every bit the answer to Fender that people asked for (most of them without any intention to actually support such a product). I wish the 4004 would take on a handful more fun iterations in the RIC lineup. Only thing I remain on the fence about is the neck pickup rout, which on my bass was filled in by the 2nd owner and covered up.

My good forum friend Dan R. had a really rough time with these basses... Wish I could let him try mine some day.

[cjj]

Thank goodness I found someone else who has a 4004

Oh, there's quite a few of us around.

Maybe just not on your side of the pond.

Some of us even have more than one...

[woodyng]

Thank goodness I found someone else who has a 4004

Oh, there's quite a few of us around.

Maybe just not on your side of the pond.

Some of us even have more than one...

Love my 3!
Cheyenne1,2, and Laredo. Got it covered on the different woods,and pickup positions....the Cii's even defretted.

[Ashgray]

I've now installed one of Dane's harnesses to provide a blend control rather than the mini-slector, and coil taps on each pup. Looks nice with the addition of three new gold/ebony knobs from Q-Parts. Some shots:

Ash

[bassduke49]

Scrumptious! Love the knobs!

[jps]

I've now installed one of Dane's harnesses to provide a blend control rather than the mini-slector
Ash

Does the blend pot have a smaller diameter shaft to fit in the switch hole without enlarging it?

[Ashgray]

No Jeff, I needed to enlarge the hole to 3/8" to get the shaft through.

Ash

[jps]

Thanks for the info, Ash.

If I were to do a VVT, or a VPT to my Snowglo 4004 I do not want to enlarge the switch hole, so I will have to research what may be out there in Potsville®. Maybe Hawaii or Colombia.................

[Ashgray]

Thanks for the info, Ash.

If I were to do a VVT, or a VPT to my Snowglo 4004 I do not want to enlarge the switch hole, so I will have to research what may be out there in Potsville®. Maybe Hawaii or Colombia.................

Yeah, I know what you mean. I've kept the old harness and am really pleased with the new one, but it's a pretty irreversable mod once the switch hole is drilled out.

Ash

[aceonbass]

If I were to do a VVT, or a VPT to my Snowglo 4004 I do not want to enlarge the switch hole, so I will have to research what may be out there in Potsville®. Maybe Hawaii or Colombia.................

There currently is no one making a quality blend pot with a 1/4" bushing diameter and a solid shaft. I use to use Alpha push-pull pots, which had a 1/4" bushing, but the Bourns pots I use, which have a 3/8" bushing, are of better quality.

[jps]

IS there anyone making a quality volume pot in 1/4" to make a VVT harness?

[woodyng]

IS there anyone making a quality volume pot in 1/4" to make a VVT harness?

Just drill it!!!!

[woodyng]

I've now installed one of Dane's harnesses to provide a blend control rather than the mini-slector, and coil taps on each pup. Looks nice with the addition of three new gold/ebony knobs from Q-Parts. Some shots:

IMG_1298.JPG

IMG_1287.JPG

IMG_1315.JPG

IMG_1292.JPG

IMG_1313.JPG

IMG_1300.JPG

Ash

Great looking bass,the q-parts knobs look fab,too. I have 4 of them on my similar-color scheme Fernandes Gravity 8-string bass....

[jps]

IS there anyone making a quality volume pot in 1/4" to make a VVT harness?

Just drill it!!!!

BTDT/WTDIDTT